Standard Connection Method

Posted on

How to Setup Standard Connection Method? – Find instructions on how to set up the Canon Wireless Standard Connection Method on your PIXMA MG3540 printer and also how to reset the printer to factory settings. Some access points (sometimes referred to as routers or hubs) feature an automatic connection button labeled “WPS” which stands for Wi-Fi Protected Setup.

This allows permitted devices such as your PIXMA MG3540 to connect to your network without needing to enter a password and it enables a quick and easy method of connecting your devices. This method is by far the easiest way of connecting your PIXMA MG3540, so if your access point has a WPS button, please select the ‘WPS Connection Method’ Link below for instructions on joining using this method.

Standard Connection Method

Standard Connection Method

Standard Connection Method

Step 1

1. For Windows users, insert the CD that came with your printer and runs the setup.

If you do not have the installation CD that came with your product or you are a Mac user, you can download the manuals and software by selecting your product from the PIXMA range page.

2. When the initial screen appears, click on [Next].

[MASTER] Picture_PIXMA Wireless Connection tab 2_1

<Mac users only>

When the following screen appears, type your password to allow the helper tool to be installed, then click on [Install Helper]

[MASTER] Picture_PIXMA Wireless Connection tab 2_2

When the following screen appears, click on [Next]

[MASTER] Picture_PIXMA Wireless Connection tab 2_3

Please note: A screen will be displayed asking you to select between a USB or wireless connection, please select [Wireless Connection].

[MASTER] Picture_PIXMA Wireless Connection tab 2_4

3. Ensure that your printer is turned on, make sure the power amp is on and then click [Next].

[MASTER] Picture_PIXMA Wireless Connection tab 2_5

Step 2

1. Click [Connect to the network].

[MASTER] Picture_PIXMA Wireless Connection tab 2_6

2. When the following screen appears, click [Cableless setup].

Please note: For Windows XP users the cableless install method is not supported, please select the [Another setup] method, then proceed to step 5.

[MASTER] Picture_PIXMA Wireless Connection tab 2_7

3. When the [Connection via Cableless setup] screen appears, hold down the printer’s [Wi-Fi] button (A) until the orange alarm lamp (B) flashes two times, then release after the second flash.

[MASTER] Picture_PIXMA Wireless Connection tab 2_8

4. Confirm that the (blue) Wi-Fi lamp (A) flashes quickly and the (green) power lamp is lit. Click [Next].

Please Note: Your network connection will be temporarily disabled during the setup.

[MASTER] Picture_PIXMA Wireless Connection tab 2_9

Click [Next].

5. Windows XP users only, select [Wireless Setup Using the USB Cable]

[MASTER] Picture_PIXMA Wireless Connection tab 2_10

Step 3

1. When the following screen appears, select your region, and then click on [Next].

[MASTER] Picture_PIXMA Wireless Connection tab 2_11

2. When the following screen appears, select your place of residence and then click on [Next].

[MASTER] Picture_PIXMA Wireless Connection tab 2_12

3. When the following screen appears, select the software you wish to install and then click on [Next]. If you’re not sure which software you want to install at this stage, don’t worry, as you can always uninstall it at a later stage if you wish.

[MASTER] Picture_PIXMA Wireless Connection tab 2_13

4. When the following screen appears, click on [Yes] to agree to the end user license agreement.

[MASTER] Picture_PIXMA Wireless Connection tab 2_14

<Windows users only>

When the following screen appears, click on [Next].

[MASTER] Picture_PIXMA Wireless Connection tab 2_15

5. The following screen indicates the model of your printer and the name (or SSID) of your wireless network.

Windows (excluding Windows XP Users)

[MASTER] Picture_PIXMA Wireless Connection tab 2_16

Click [Complete].

This concludes the Windows Cableless setup. 

For Windows XP users, or users where the printer could not be detected, please continue with the USB installation detailed in step 6.

<Mac users only>

When the following screen appears, click on [Add Printer]

[MASTER] Picture_PIXMA Wireless Connection tab 2_17

In the following screen, select the [Canon IJ Network] driver version and click [Add].

[MASTER] Picture_PIXMA Wireless Connection tab 2_18

Click [Next] to complete the setup.

This concludes the Mac Cableless setup. 

For users where the printer could not be detected, please continue with the USB installation detailed in step 6.

USB cable setup for Windows XP users and where the network connection was not detected

6. Select [Set up network connection via USB], then click [Next].

[MASTER] Picture_PIXMA Wireless Connection tab 2_19

7. When the following screen appears, connect your printer to your computer using the supplied USB cable. This is the cable with the [MASTER] Picture_PIXMA Wireless Connection tab 2_20symbol on the connector.

[MASTER] Picture_PIXMA Wireless Connection tab 2_21

For Mac users, click [Next].

8. Once your printer has been detected, the following screen will appear.

[MASTER] Picture_PIXMA Wireless Connection tab 2_22

The name of the access point that your computer is connected to will be displayed (where “xxxxxxxxxxxxx” is shown).

If this is the wireless network you want your printer to connect to, click on [Yes].

<For Mac users only>

When the following screen appears, click [Allow].

[MASTER] Picture_PIXMA Wireless Connection tab 2_23

9. When the following screen appears, disconnect your printer from your computer and click [Next].

[MASTER] Picture_PIXMA Wireless Connection tab 2_24

<Windows Only>

When the following screen appears, click [Complete].

[MASTER] Picture_PIXMA Wireless Connection tab 2_25

This concludes the Windows setup.

<For Mac users only>

Once your printer has been detected, the following screen will appear indicating the name of the access point that your computer is connected to (where “xxxxxxxxxxxxx” is shown). Click [OK].

[MASTER] Picture_PIXMA Wireless Connection tab 2_26

When the following screen appears, click [Add Printer].

[MASTER] Picture_PIXMA Wireless Connection tab 2_27

In the following screen, select the [Canon IJ Network] driver version and click [Add].

[MASTER] Picture_PIXMA Wireless Connection tab 2_18

Click [Next] to complete the setup.

This concludes the Mac setup.

Restoring your PIXMA MG3540 network settings back to the factory default settings

If you need to reset your network settings back to factory default, for example, if you change your access point, you can do so by following these instructions.

Please note that initialization erases all network settings on the machine, so printing or scanning from a computer over the network will become impossible until the printer is re-configured with new network settings.

Follow the procedure below to initialize the network settings:

  1. Press and hold the [RESUME/CANCEL [MASTER] Picture_PIXMA Wireless Connection Setup Page stop button ] button until the alarm lamp flashes [MASTER] Picture_PIXMA Wireless Connection tab 1_2 17 times.
  2. Release the [RESUME/CANCEL [MASTER] Picture_PIXMA Wireless Connection Setup Page stop button ] button.

The network settings have been reset back to factory default settings. If this process is still failing after following this guide, please contact us for further assistance.